top of page

ANTHONY R. VIZZARI - ARTIST & COLLECTOR

UNDELETED PHOTOS ANTHONYVIZZARI.COM

HOME - BLOG - PHOTOWORK  - MOMP - CONTACT

"THE MACHINE" NOTES:

  1. Tools Required: Screw driver and/or screw gun.

  2. Remove ONLY the top cover of the crate. The top cover is screwed in place. These screws are circled in red. DO NOT CROW BAR or remove any other screws.

  3. SAVE ALL crate parts and packing materials. These will be used to repack the crate and ship to the next location. 

  4. SEE VIDEOS FOR UNPACKING: After removing the top, remove the block stops screwed into the inside of the crate. Then, remove the boxes of "cards". Next, remove the dispenser machine stand. Last, release the foam around the dispenser and remove the machine from the crate. Assemble the machine and secure to base before filling with cards. The lock can be secured with a three digit combination. Combination will be emailed ot texted to you. 

  5. When "The Machine" is ready to go to the next location, disassemble the machine and repack in the crate as found upon arrival. 

(Video) The Machine in use.

Closed Crate.JPG

Packed in crate. 

The Machine - UNDELETED.JPG

The Machine on stand.

Open-Top.JPG

Crate with top removed.

Open-Top No Foam.JPG

Foam removed.

Screws.JPG

(Top) Only remove screws circled in red.

WATCH THESE VIDEOS TO LEARN HOW TO ASSMEBLE THE MACHINE

PART 1: UNPACKING THE CRATE

PART 2: BUILDING & LOADING THE MACHINE

The Photobooth Architects - A Division of A&A Studios, Inc. 

7947 Ogden Avenue | Lyons, Illinois 60534 U.S.A. | +1.312.278.1144 

©2007-2025 A&A Studios, Inc. All Rights Reserved. 

bottom of page